USB-RS232-WE-1800-BT

The USB_RS232 cables are a family of USB to RS232 levels serial UART converter cables incorporatingFTDI’s FT232R USB to serial UART interface IC device which handles all the USB signalling and protocols.
INQUIRY
Description

The USB_RS232 cables are a family of USB to RS232 levels serial UART converter cables incorporatingFTDI’s FT232R USB to serial UART interface IC device which handles all the USB signalling and protocols.  The cables provide a fast, simple way to connect devices with a RS232 level serial UART interface to USB.

Each USB-RS232 cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector end of the cable.  The integrated electronics also include the RS232 level shifter plus Tx and Rx

LEDs which give a visual indication of traffic on the cable (if transparent USB connector specified).  The other end of the cable is bare, tinned wire ended connections by default, but can be customised using different connectors to support various applications.

Cables are FCC, CE, RoHS compliant.

Part Number FTDI Chipset UART Connector Type Max UART Baud Rate Cable Length Additional Voltage Output Level 
(If available)
Link to Datasheet
USB-RS232-WE-1800-BT_0.0 FT232R Wire-ended 1 Mbaud 1.8m 0V Datasheet
USB-RS232-WE-1800-BT_5.0 FT232R Wire-ended 1 Mbaud 1.8m 5V Datasheet
USB-RS232-WE-1800-BT_3.3 FT232R Wire-ended 1 Mbaud 1.8m 3.3V Datasheet
USB-RS232-WE-5000-BT_0.0 FT232R Wire-ended 1 Mbaud 5m 0V Datasheet
USB-RS232-WE-5000-BT5.0 FT232R Wire-ended 1 Mbaud 5m 5V Datasheet
USB-RS232-WE-5000-BT_3.3 FT232R Wire-ended 1 Mbaud 5m 3.3V Datasheet
USB-RS232-PCB
(PCB only)
FT232R - 1 Mbaud USB connector with PCB only Default configuration - 0V Datasheet